OSC-30V/OSC-51V/OSC-81V/OSC-100V/OSC-120V
Outstanding Crushing Capacity
The use of a large diameter, short stroke cylinder provides enormous crushing powers through the entire jaw closing cycle. The cylinder rod is protected by cover, which minimizes the risk of rod damage.
Wide Jaw Openings
Because the OSC crushers have the widest jaw openings in their class (28"/715mm on OSC51V, and 34" /865mm on OSC-81V), even large chunk of concrete can be processed. The pin geometry on these units improve visibility and maneuverability, and further increases productivity.
Wear-Resistance Crushing
Teeth The OSC Crushing teeth have a unique wedge shape and are made of special abrasion resistant steel. Wear is greatly reduced.
Speed valve is Standard
The OSC machines are equipped with a speed valve. In the past, larger, more powerful cylinders meant slower cycle time. Now, the speed valve activation decreases cycles time by 40%. Increased cycle speed means greater productivity.
| SPECIFICATIONS | |||||||
| OSC-30V | OSC-51V | OSC-81V | OSC-100V | OSC-120V | |||
| Operating weight | lb | 1323 | 2425 | 3880 | 5765 | 6933 | |
| kg | 600 | 1100 | 1760 | 2615 | 3145 | ||
| Overall length | inch | 62.2 | 76.2 | 89.8 | 103.1 | 110.2 | |
| mm | 1580 | 1935 | 2280 | 2620 | 2800 | ||
| Max. jaw opening | inch | 22.8 | 28.1 | 34.0 | 36.0 | 41.1 | |
| mm | 580 | 715 | 865 | 914 | 1043 | ||
| Cylinder force | ton | 56.3 | 88 | 110 | 137 | 149 | |
| Operating pressure | psi | 3555 | 3982 | 3982 | 3982 | 3982 | |
| kg/cm2 | 250 | 280 | 280 | 280 | 280 | ||
| Steel
bar Cutter length |
Standard | inch | 4.7 | 5.9 | 7.1 | 8.5 | 8.5 |
| mm | 120 | 150 | 180 | 215 | 215 | ||
| Long | inch | - | 9.1 | 11.0 | 11.0 | 11.0 | |
| mm | - | 230 | 280 | 280 | 280 | ||
| Speed valve | |||||||
| Bass machine weight | ton | 6-9 | 10-16 | 18-23 | 22-23 | 28-43 | |
OSC Pulverizer with Magnetic Iron Collector OSC-81PV/OSC-50PV
Additional electric wiring are not required.
This unit adopting permanent magnet made of Neodium generates great magnetic force.
Easy operation
After jaw closed, magnet starts generates force. When magnetic force are not used, the faction can be turned off quickly.
| SPECIFICATIONS | |||
| OSC-81PV | OSC-50PV | ||
| Operating weight | lb | 4486 | - |
| kg | 2035 | - | |
| Overall length | inch | 83.8 | - |
| mm | 2130 | - | |
| Max. jaw opening | inch | 34.0 | - |
| mm | 865 | - | |
| Cylinder force | ton | 110 | - |
| Operating pressure | psi | 3982 | - |
| kg/cm2 | 280 | - | |
| Bass machine weight | ton | 18-23 | - |
| lb | 39700-50700 | - | |
OSC-RD series OSC Pulverizer (for Road Demolition) OSC-50RD/OSC-80RD
- The mounting bracket is location with an optimum angle for the excavator's bucket link motion so as to easily lift up and crush the road pavement.
- The cross-hatch holes in the lower arm is free from jamming because of the trapezoidal shape of the holes whose outer dimension is larger than the inner dimension.
- The pivot area of the jaws is the place where sticky asphalt is normally adhered because the asphalt is compressed by the strong arm closing force. OSC-RD series has the pushing wedges which push out the asphalt through the open holes in the pivot area.
- As the steel bar cutter is equipped as standard to cut through the steel bars contained in contained in concrete pavement.
| SPECIFICATIONS | |||
| OSC-50RD | OSC-80RD | ||
| Operating weight | lb | 2612 | 4253 |
| kg | 1185 | 1930 | |
| Overall length | inch | 80.0 | 96.9 |
| mm | 2030 | 2460 | |
| Overall height | inch | 46.3 | 55.9 |
| mm | 1175 | 1420 | |
| Max. jaw opening | inch | 26.4 | 30.3 |
| mm | 670 | 770 | |
| Crushing force (at jaw center) | ton | 60 | 80 |
| Operating pressure | psi | 3980 | 3980 |
| kg/cm2 | 280 | 280 | |
| Steel bar cutter length | inch | 5.9 | 7.1 |
| mm | 150 | 180 | |
| Bass machine weight | ton | 10-16 | 18-23 |